Monthly Archives: June 2013

How To Choose Top Grade Wooden Door

Posted on by

During home decoration, wooden door are gradually paid more attention and in the part lots of people only make some simple wooden door or choose some finished wooden door for cabinet and other furniture. Have you considered buying top grade wooden door?

Firstly, door raw material
Believe it or not, the quality of raw material for door is closely related to the final quality of door. Nowadays lot of top grade wooden doors are made from compound solid wooden, which not only keep the advantages of natural solid wooden, but also overcome the disadvantages of solid wooden such as crack or out of shape easily. As for the core part at door, it is always made from top quality kahikatea after drying, which is effective to avoid crack.
Continue reading »

Metal Circular Saw Machine Maintenance Tips Before Working

Posted on by

Metal circular saw machine should be taken daily maintenance so as to avoid security incidents and extend its working life. According to different maintenance time, it can be divided into maintenance before working, maintenance during working and maintenance after working. Do you know which measures should be taken for maintenance before working? Here are some related tips you can follow.

Firstly, follow the lubrication drawing strictly, and then add lubricating oil into machine. The amount of lubricating oil should be kept at the appropriate degree so that it would be more smooth when cutting. Corrosion, scratch and other flaws are not allowed.
Continue reading »

Crack Edge Problem When Using Pushing Table Saw

Posted on by

Have you used pushing table saw for cutting material? Or during the pushing table saw using process, have you encountered the crack edge condition? If yes, do you know the reasons for such terrible condition?

If the crack edge condition is at the top, the possible reasons would include these reasons. Firstly, main saw blade is too blunt or the number of saw teeth is too much less. Secondly, main saw blade is not higher enough than cutting panel. Thirdly, cutting panel itself is with poor quality so that it will make saw blade become blunt.
Continue reading »

How To Solve These Two Problems About Saw Blade Using

Posted on by

In the following article, I will introduce two common problems when using circular saw blade for cutting, are you interested in learning these knowledge?

Firstly, saw blade is not round shape any longer. As for reasons of such condition, because of abrasion on principal axis, the gap between saw blade center hole and principal axis would be more and more larger, or sometimes its installation is not very right.
Continue reading »

Five Tips About Using TCT Circular Saw Blade

Posted on by

As you know, TCT circular saw blade is widely used for cutting wooden materials, panel, solid wooden, plastic and even metal such as aluminum, however, do you know how to use saw blade with right ways and how to maintain it with right ways? Take it easy, I will introduce these related knowledge in the following article.

Firstly, it is important to avoid any damage on the tool bit of TCT circular saw blade. You know, the cutting edge of TCT saw blade’s tool bit is too much sharp and sensitive, and its cutting performance would be affected if there is anything flaws on tool bit, therefore no matter installing saw blade, or moving saw blade or even removing it, you should be more careful.
Continue reading »

Three Steps About Gear Grinding Machine Installation

Posted on by

Gear grinding machine is the ones being used for saw blade grinding, however, do you know how to use gear grinding machine with right ways? If you are interested in such topic, follow these steps introduced below.

Firstly, when installing machine, it should be at that flat floor and meanwhile it is better to be fixed tightly. Then every part should be fixed by screw, you have to use hands to check it. Before using, please make sure that all the parts should be flexible, if necessary, you can add a certain amount of lubricating oil into machine.
Continue reading »

Cutting Efficiency Factors You Need To Know

Posted on by

When buying diamond circular, have you considered the cutting efficiency, also known as cutting production rate? In fact, it is one of important parameters you have to consider. The meaning of cutting efficiency is the product of cutting depth and cutting feed speed, and in the unit time, the sectional area of cutting raw material.
Continue reading »

Tips About Gear Grinding Machine for You

Posted on by

Do you know the function of gear grinding machine? Just as its name implies, it is the exclusive use machine which can be used to grinded cemented carbide saw blade. As usual, there are strict requirements on the grinding wheel, electrical machine and working table, meanwhile, it is important to choose right cutting fluid, which plays the role of cooling cemented carbide tool bit, at the same time, the whole cutting surface evenness would be improved and final grinding result would be better.
Continue reading »

Do You Know Saw Teeth Angle Parameter

Posted on by

When buying TCT circular saw blade, please not to ignore the saw teeth angle parameter, in fact, lots of people would be confused with such parameter because it is more complicated and more professional, but if you want to choose top quality saw blade, you should be careful about it because there is close relationship between saw teeth angle and cutting quality.

When talking about saw teeth angle, there are three angles which should be paid attention by you, including the front rake angle, relief angle and wedge angle.
Continue reading »

Three Main Kinds of Circular Saw Blade Matrix

Posted on by

As you know, the quality of saw blade matrix is closely related to the saw blade itself quality, therefore when buying TCT saw blade, you should check its matrix. At the same time, you should know the advantages and disadvantages of different kinds of matrix.

Carbon tool steel
More carbon elements are contained in such carbon tool steel and its thermal conductivity is very high. However, under the high temperature, about 200 Celsius degree to 250 Celsius degree, both its hardness and abrasion resistance would be reduced greatly, meanwhile, after being heat treatment, it is easy to be out of shape and what’s worse, it is likely to crack.
Continue reading »