Circular saw blade will be abraded slowly during the cutting and sawing process, which is inevitable. However, you can still use other ways to improve the circular saw blade’s working life. Here are some related tips you can take a try.

Firstly, raw material for saw blade. It is better to choose the raw material with good performance of heat resistance for saw blade production. At the same time, they would have higher toughness, good strength, small stress and deformation. Every tooth holder’s depth and angle should be the same, common difference would be more accurate. In short, raw material’s density, thickness and even hardness should be the same.

Secondly, welding saw teeth workmanship. It is better to choose low temperature silver solder, along with scaling powder, which has good performance of mobility. Meanwhile, in order to avoid the sudden hot temperature and sudden cold temperature in workshop, the working temperature for welding saw teeth should not be over 750 Celsius degree in principle, and the temperature at every saw teeth should be uniform. How to choose the right high frequency generator? According to the suggestion from experts, it is better to choose the ones with heating function at both sides, therefore the temperature of metal and raw materials should be the same, and the welding strength should be kept.

Thirdly, gear grinding accuracy and its using workmanship. As is know to all, if you want the saw blade has longer working life because of its good durability, you have to pay more attention on its cutting edge.

Fourthly, strengthen the checking before the saw blade leave factory. During the saw blade productive process, every working procedure should accord with its reasonable manufacturing technique. At every production process, you have to pay strict and meticulous inspection at every step. It is complicated to judge the exact reason for saw blade quality problem, therefore if you don’t focus on these working procedure, it would be more dangerous in the future. In fact, all these problems can be solved as long as careful analysis of all factors.

Ally raw materials are the expensive resources, therefore it is important to improve products’ quality and reduce the resource consumption. As for circular saw blade production, saw teeth’s deepness should be controlled automatically, which is the key factors and can not be neglected. Otherwise lots of grinding wheel and ally raw materials would be consumed and the cost of production can not be reduced.