Remote control buses can be made up by four parts, which are the transmitter, receiver, servo, and ESC. The details are as below.

The first part, the transmitter. We can master our buses by handing‘‘ the transmitter’’, which can be classified into two types, the rod transmitter that has 2, 4, 6, 8, and 12 thoroughfares and gun transmoiiter that has 2, 3, 4 thoroughfares. Besides, the transmitter can be classified into AM and FM as well as 2.4 GHZ by transmitting signal. Among them, AM and FM can be disturbed easily, but they have cheap price. For 2.4 GHZ, it has expensive price, but it can not be disturbed. At present, the 2.4 GHZ has become the mainstream.

The second part, the receiver, which is installed in the remote control buses so as to receive these signals from the transmitter and change these signals into pulse or digital signals as well as delivery them to other electrical parts in this remote control buses. In this way remote control buses can finish our sending action. And the receiver can be classified into AM, FM and 2.4 GHZ by transmitting signal identically.

The third part, the servo, which needs to change these signals from the receiver into mechanical action. For example, change the direction and add as well as subtract the throttle and so on. Moreover, this can be classified into metal, plastic teeth, brushless, brush as well.

The fourth part, the ESC which is the power output control system of remote control buses and can be classified into brush and brushless. And the brushless can be classified into inductive and non-inductive.

All above are the composition introduction of remote control bus, so you can try to make it if you are a bus’s lover.