When using TCT circular saw blade for cutting and sawing some materials such as wood, you would face some problems, do you know the reasons and how to deal with such condition?

Here are two common problems about TCT circular saw blade using and you can follow the solution introduced to solve.

Firstly, the saw blade is so blunt that it is difficult to cut and saw.

Possible reasons for such problem.

At firstly, the saw blade binding agent is too hard. Secondly, the linear speed of saw blade is too high. Finally, power is not enough to make saw blade work normally.

How to solve such problem?
Select a little soft saw blade binding agent. Choose the right saw blade with suitable diameter according to the products instruction book. Check band carrier, voltage and motor to ensure the motive power is enough but not excessive.

Secondly, saw blade is not on its right track, what are the reason?

Saw blade itself is not too sharp, therefore when using for sawing and cutting, there would be huge resistance between saw blade and sawing material.

Bearing is deformed, without right operating when fix screw nut and clamping piece, bearing is easy to be deformed, as a result, there would be huge resistance at the both sides of saw blade.