Do you know how to use circular saw blades correctly? This is the right topic I will discuss in the following article.

Firstly, after the saw blade is installed stably and firmly, you should idle it for about 30 seconds to check whether everything is OK. If yes, it is time for you to begin cutting and sawing work.

Secondly, when installing saw blade, the screw nut of ring flange should be loose properly. However, you should control the condition, if it is too loose, when cutting and sawing, saw blade is likely to slip, on the other hands, if it is too tight, saw blade is easy to be damaged or be out of shape, which would finally effect the cutting performance.

Thirdly, before cutting and sawing, the professional workers should take necessary safeguard procedures. For example, it is necessary to wear safety glasses, dust masks, helmets and protective gloves. In addition, workers have to check whether the saw machines’ protective cover is in good condition or not.

Finally, here are some tips about how to choose diamond grinding wheel. It is better to use wet-type grinding and the feeding speed should be about 1mm or 2mm per second. If conditions allows, it is better to grind the front corner and back corner at the same time.